Huntsman Araldite 2014 High-Temp Chemical-Proof Epoxy Gel 50ml 50ml w/Hand Plunger

Araldite 2014 is a Beige-Grey colored two component, room temperature curing, thixotropic Epoxy adhesive (Thick Gel that will also fill crevices). It is high-strength and very tough, with excellent environmental and chemical resistance. It is It performs well bonding to metals, electronic components, plastics, and where higher operating temperature or aggressive environmental conditions apply. And it's uniquely capable of providing decent bond strength to PTFE/Teflon, as it includes chemicaletch-ants, that prepares the PTFE like other separate primer products do. It produces very little 'out gassing' when curing, and is suitable for specialized electronics, telecommunications, and aerospace applications. Work Time: 60 minutes Handling Strength: 3 hours Color: Beige Grey & Dries: Beige Grey Viscosity: Gel/Paste (yet thixotropic, so also fills voids and crevices).The 50ml Cartridges are 2:1 ratio, and are designed to work best with a 50ml cartridge Dispenser with a 2:1 ratio plunger. We strongly advise you use a 50ml Dispenser WITH a 2:1 ratio plunger for this cartridges. If you do not have one, please check out our 2:1 ratio Dispensers, all are excellent products and have our 'it's good' seal of approval. If you prefer not to use a Dispenser, then we recommend considering one of our 50ml Kits that include a variety of different accessories that you may need for fast small jobs. The 200ml Cartridges are 2:1 ratio, and are designed to work best with a 200ml cartridge Dispenser with a 2:1 ratio plunger. We strongly advise you use a 200ml Dispenser WITH a 2:1 ratio plunger for this cartridges. If you do not have one, please check out our 2:1 ratio Dispensers, all are excellent products and have our